Tony Withers: Lab: Transformer

Transformer: Standard Operating Procedure

This file contains instructions for how to switch transformer output.

For LaCrO3 (48V)

Turn off the power – all switches including the big red and yellow one.
Bolt correct connector to transformer for 1:5/1:10 step down (connects X2 & X3).
Output switch to 24V position.
PID: Pb=1200, tI=5s, td=1s.
In Channel Setup, load settings for LaCrO3.
Use program # 4 for normal operation with LaCrO3.

For Graphite (12V)

Turn off the power – all switches including the big red and yellow one.
Bolt correct connector to transformer for 1:10/1:20 step down (connects X1 & X3, X2 & X4).
Output switch to 12V position.
PID: Pb=5000, tI=5s, td=1s.
In Channel Setup, load settings for graphite.
Use program #1 for normal operation with graphite.

ACW 2006

The views and opinions expressed in this page are strictly those of the page author. The contents of this page have been neither reviewed nor approved by the University of Minnesota.